Are DIY Plantation Shutters A Savvy Solution For Your Austin House?

Tyler Jorgensen

DIY plantation shutters for your Austin residence might seem like a savvy solution initially. You purchase the shutters, and you start mounting them according to the steps listed in the accompanying pamphlet.

But the biggest concern is that, unlike other home improvement projects, there’s 100 ways to end up with serious errors when setting up plantation shutters. You could take the measurements the window incorrectly or bust something while setting up the shutters. The product will then become inoperable or the material will be ruined. And you’ll have to buy all the pieces all over again.

If you don’t have the experience, the finishing touches, and the tools, you’re at a greater risk of ending up with a mistake. Where DIY plantation shutters are concerned, the cost of a mistake outweighs any benefits. Shutter experts explain 5 more reasons why DIY plantation shutters are not a savvy solution for your Austin house.

1. The Right Shutter Product

The store you order shutters from is unlikely to have the selection you‘re looking for. And, they may not aid you in determining which shutters are the best fit for a specific room. Plantation shutters that work in the living room may not be suitable for the bathroom where they’d be subjected to high humidity. And not all shutters fit all windows.

Our experts help you choose the right shutters and the right frame with the right options so they last a lifetime. We offer you these quality plantation shutters: Polywood® shutters (the best-selling plantation shutters in the US) and Ovation® shutters (five star rated wood shutters).

2. Different Window Shapes

White arched plantation shutters in blue bedroom

You may have noticed how the windows in your home are not the same size. And they could even be unique shapes, like triangle, arched, circle, and octagon.

Most suppliers and online retailers only offer plantation shutters for rectangular windows. They won’t carry specialty shaped shutters because there’s a great chance for flaws in measurement. If they do have them and your measurements aren’t correct, the shutters will be too big for the window. This is where it’s easy to make mistakes with DIY plantation shutters.

And what’s worse, DIY plantation shutters for a special shaped window might result in shutters that you cannot open and close as they should. You could also mount the shutter in a way that doesn’t allow the louvers to move easily.

Our specialists note the width and length of your window - and every corner in between. This ensures that your specialty shaped plantation shutters fit flawlessly. Then, utilizing computer technology and relying on 40+ years of experience with window shutters, we fashion your indoor shutters to complement your uniquely shaped windows to a T.

3. Challenging Window Types

Some windows tilt in or slide. Others use a crank. If you don’t leave enough room between the window and the shutter panels when mounting your DIY plantation shutters, you’ll be left with a window that won’t tilt in and a crank that is not accessible.

Our experts have seen the spectrum of window types out there. They’ve installed shutters on double hung windows, windows with cranks, French doors, sliding glass doors, bay windows - and more! We take care to install the plantation shutters you need in the right louver size so you can easily access your window and adjust your shutters.

4. Attention To Detail

Every angle, every piece, every one eighth inch is key when setting up plantation shutters yourself. So keep an eye out for the details. If the louvers bind and the panel is not level, you end up with window shutters that have tightness all over, limited functionality, and big gaps. These problems can lead to irregular wear and tear on shutters. The shutter panels may not even work correctly.

If your DIY plantation shutters are not installed squarely, it’s possible that too much pressure can build up from the weight and the usage. And this could lead to the shutters breaking.

Reduce the stress involved in this project by hiring specialists to set up your plantation shutters in Austin, TX. Some local stores, like Sunburst Shutters Austin, have a white glove service. We’ve been mounting plantation shutters for decades. Our experts attend to each and every detail of the installation process to ensure that your window shutters look perfectly finished every time - and work effortlessly. You don’t have to tell us to wear protective booties over our shoes (or watch for that valuable vase). That’s because we treat your home with the same attention we show your windows.

5. Overall Cost

At first, the main cost of DIY plantation shutters seems to be the actual shutters. But the costs of additional shutter parts, materials to apply the finishing touches, and the tools needed add up faster than you think. And that’s without mentioning the physical demands and stress of this undertaking. Can you handle the actual cost of DIY plantation shutters?

Hire A Plantation Shutters Expert In Austin, TX Today

Professional installation of Polywood shutters

Where DIY plantation shutters are concerned in Austin, it’s a a job for the specialists at Sunburst Shutters Austin. We’ll visit your house and walk you through the process of picking the plantation shutters that match your color scheme. And we’ll measure your windows so we can craft your plantation shutters to look and operate beautifully. Why don’t you let us worry about the installation details?. You’ll love how good your plantation shutters look when we leave! (And you didn’t even have to lift a finger.)

Give us a call at 512-549-6077 or fill out the form below to schedule your free in-home consultation today!